| |
ADIPOL offers top pre-forming characteristics in relation to price - with an approximate duration of about 400,000
strokes before breakage.
Two different colors. Available in two versions, 90 Sh.A. Orange color, and 95 Sh.A. Honey color, with the following
specifications:
| |
|
|
A70 |
A80 |
A90 |
A95 |
60D |
| HARDNESS |
ASTM224 |
ShA |
72 |
80 |
90 |
95 |
98 |
| BREAKING STRENGHT |
DIN 53504 |
MPa |
20 |
20 |
30 |
40 |
45 |
| ELONGATION AT BREAK |
DIN 53504 |
% |
570 |
750 |
360 |
320 |
325 |
| 300% MODULE |
DIN 53504 |
MPa |
5,5 |
5,5 |
17 |
35 |
37 |
| TEAR RESISTANCE |
DIN 53515 |
KN/m |
11 |
14 |
54 |
97 |
134 |
| COMPRESSION SET |
DIN 53517 |
% |
18 |
25 |
23 |
35 |
36 |
| ABRASION |
DIN 53516 |
mm3 |
40 |
50 |
75 |
75 |
76 |
| REBOUND |
AL/4E |
% |
65 |
55 |
52 |
52 |
38 |
| COLOR |
|
|
black |
blue |
orange |
honey |
honey |
 RESISTANT TO CHEMICAL AGENTS |
 |
| A) |
No effect |
| B) |
Minimum effect |
| C) |
Severe effect |
|
| Acetone |
C |
Hydraulic oils |
A |
| 20% Acetic acid |
B |
Hydrogen |
A |
| Ammonium hydroxide sol. |
A |
Kerosine |
C |
| ASTM oil 70°C |
A |
Lubricating oils |
B |
| Benzol |
C |
Magnesium chloride sol. |
A |
| Boric acid sol. |
A |
Mercury |
A |
| Butane |
A |
Methyl alcohol |
C |
| Calcium bisulfite sol. |
A |
Methyl ethyl ketone |
C |
| Calcium hydroxide sol. |
A |
Mineral oil |
A |
| Carbon dioxide |
A |
Naphtha |
B |
| Carbon monoxide |
A |
10% Nitric acid |
A |
| Carbon tetrachloride |
C |
Oleic acid |
B |
| Cupric chloride sol. |
A |
Perchloroethylene |
C |
| Cupric sulfate sol. |
A |
Phenol |
C |
| Ethyl acetate |
C |
SAE oil 70°C |
A |
| Ethyl alcohol |
C |
Soap sol. |
A |
| Ethylene glycol |
B |
46% Sodium hydrate |
C |
| Formic acid |
C |
50-80% Sulfuric acid |
A |
| Freon-11 |
B |
10% Tannic acid |
A |
| Freon-12 +54°C |
A |
Tartaric acid |
A |
| Freon-22 |
C |
Toluol |
C |
| Gasoline |
B |
Trisodium phosphate sol. |
A |
| Glycerol |
A |
Trichloroethylene |
C |
| Glue |
A |
Turpentine |
C |
| 20% Hydrochloric acid |
B |
Water 50°C |
A |
|
| |
|
| RESISTANCE TO HEAT |
|
The maximum operating temperature is 80°C. Consider that the mechanical specifications decrease
by 65% under those conditions. However, exposure to temperatures of up to 120°C is permitted for brief
periods. |
| |
|
|
RESISTANCE TO COLD |
|
The base mix in ADIPOL withstands -40°C.
The advisable limit for the ULTRAFLEX range is +10°C. |
| |
|
|
|
